360 degree 8t 9t Pillar Jib Crane With Chain Electric Hoist

Product Description

                                     Slewing Jib crane Workshop use lifting equipment Pillar jib crane with chain electric hoist

Product Name: Floor-Mounted Jib Crane
Model: BZ
Features: Unique structure, flexible, operation in Three-dimensional space, especially suitable for short distance and intensive operation.
Application: Workshop, warehouse, wharf, etc.

Box-type shaped by wielding; High quality carbon steel Q235B and Q345B; The girder connected by high strength screws; Welding seams are tested by X-ray and ultrasound; Forged wheels; Compact structure, small volume and light weight trolley; Lifting mechanism is open type winch trolley; Compact reducer motor drive, step less control, hardened gears and safety disc brake; Good operation performance, step less speed regulating and running smoothly; Main girders Shot blasting sa2.5 after welding to release internal stresses; This floor mounted jib crane is a small and medium lifting equipment. It has the advantages of good adaptability, flexible operation, high efficiency, saving costs, etc.

Specifications: Completely freestanding crane. Capacities available from 500 to 10,000 lbs. Spans up to 20 feet. Use I-beam boom assemblies for heavier capacities and longer spans. You can use manual chain hoists, electric chain hoists, or wire rope hoists on these jib cranes. Works well under overhead cranes.

Technical parameters:

This floor mounted jib crane is a small and medium lifting equipment. It has the advantages of good adaptability, flexible operation, high efficiency, saving costs, etc.

Electric System:
1. Power supply through step less slide lines;
2. Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time;
3. Control panel protection degree is IP54;
4. Reasonable components installation, convenient for check and maintenance;
5. Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;
Safety Protection Devices:
Overload limiter, limit switch (lifting and traveling), interlocking protection devices, buffer, track sweep plate, shield, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.

Application Environment :
1 . Motor Power: AC 3 Phases, Rated frequency: 50Hz, Rated Voltage: 380V.
2 . Altitude not more than 2,000m.
3 . There shall be no flammable, explosive and corrosive gases at the working site.
4 . This product is forbidden to hoist molten metal, toxic substances and flammable and explosive materials.